Car Craft Blog
In Car Craft’s blogs we’ve got news, videos, project cars, street machines and tons more! Catch all of the latest ramblings in the Car Craft world and drop a few comments while you’re at it.
F-Series will lead the pack.
|
Posted Today 07:00 AM by Nikolas Kolenich
Ford is now the first global automaker to offer one-stop
shopping and servicing in Myanmar, which will result in a lineup that includes
both cars and trucks. The most populated city, Yangon, will house the
facilities. The...
Read full blog
|
Photography: GM
|
Posted Yesterday 02:00 PM by Nikolas Kolenich
The ’14 Corvette will start at $51,995; the convertible at
$56,995. The ‘Ray has a 6.2L LT1, a new seven-speed trans with Active Rev
Matching, a carbon-fiber hood, an aluminum frame that shed 99 pounds over the
previous...
Read full blog
|
Watch out. We’re so punny.
|
Posted Yesterday 07:00 AM by Nikolas Kolenich
When certain things happen in life, commemorative things
happen too. Like, royal weddings result in special dinner plates. The Mustang
is about to turn 50 (actual bday: April 17, 2014) and while so far no dinner
plates,...
Read full blog
|
Hello, Governor. Er, Ambassador.
|
Posted May 13 2013 11:17 AM by Nikolas Kolenich
You can now become a Nitto Ambassador. That entails getting access to unique Nitto content and articles then sharing them on your social media of choice. In return, you’ll gain points potentially worth free things in the...
Read full blog
|
Anti Tour Hits The Road To Morro Bay, California
|
Posted May 4 2013 05:52 PM by Nikolas Kolenich
Nikolas Kolenich details the first day events of the Car Craft Anti Tour. Follow along right here and get the front row pass!The day started out bright and early and the Car Craft Staff hit the road at 6am sharp. Doug and I...
Read full blog
|
Ultra-rare part being used for a restoration
|
Posted April 23 2013 11:06 AM by Nikolas Kolenich
This is a Boss 429 piston we spotted at JMS Racing in El Monte California. It's stamped with "FoMoCo" and the aluminum rod is stamped "M/T" as in Mickey Thompson. It is for a factory '69 Mustang restoration.
Read full blog
|
Hypertherm's Powermax45 is good for plasma cutting and gouging
|
Posted April 18 2013 02:05 PM by Nikolas Kolenich
Yesterday, We were invited to a product demo put on by Hypertherm, a company out of New Hampshire that makes cutting products for industrial and home use. Specifically, they make plasma cutters, and they brought their...
Read full blog
|
Simple connection to the factory ECU and TCU
|
Posted April 15 2013 10:25 AM by Nikolas Kolenich
Nothing is cooler than a motor swap: big horsepower for a small ride. The biggest downside of doing an engine swap can be getting the project on the road and running. Painless Performance Products has taken the wiring...
Read full blog
|
What part is this?
|
Posted April 11 2013 04:16 PM by Nikolas Kolenich
Spending late nights in the garage can garner up all sorts of curiosity. Inevitably, we always stumble upon a part or component and have no clue what it is, where it goes or even what it does. After a while, parts and...
Read full blog
|
QA1 Mopar K-members A-, B-, and E-Body
|
Posted April 11 2013 03:03 PM by Nikolas Kolenich
QA1's replacement K-members are the perfect solution to
aging suspension parts and components for A-, B-, and E-Body Mopars. QA1 has
specifically engineered these K-members to directly bolt-in to any A-, B- or
E-Body Mopar...
Read full blog
|
Increase Street Or Strip Handling Performance With QA1 Bolt-In Upper and Lower A
|
Posted April 11 2013 02:28 PM by Nikolas Kolenich
If you’re in the market to upgrade your current GM A-, G- and F-body suspension, QA1 control arms may be the solution. For street or strip duty, QA1 control arms are available in two distinct styles: One that utilizes stock...
Read full blog
|
1964-1973 A-Bodies, 1973-1976 E-Bodies and the 1970 and up B-Bodies
|
Posted April 11 2013 01:15 PM by Nikolas Kolenich
All components are machined in-house and Made in AmericaMopar upper and lower control arms are now available for the Mopar 1964-1973 A-Bodies, 1973-1976 E-Bodies and the 1970 and up B-Bodies. Designed to bolt into the...
Read full blog
|
Promotional pricing for Challenge Series, through April
|
Posted April 3 2013 04:26 PM by Nikolas Kolenich
Do you own an American muscle car; are you interested in upgrading your disc brakes? Well, now's the time! For two months (March 1 through May 31, 2013) Wilwood is having discount pricing on all Challenge Series, front...
Read full blog
|
2010-12 Camaro SS rear-end gear upgrades
|
Posted March 26 2013 11:21 AM by Nikolas Kolenich
Lingenfelter, an aftermarket company known for its Camaro and LS engine accessories, has announced upgrades for 2010-12 Camaro SS rear-end gears. The company offers two options: 3.70 and 3.91 ring & pinion setups. Both...
Read full blog
|
Immersion disaster-response training.
|
Posted March 24 2013 08:00 AM by Nikolas Kolenich
What to do with vehicles deemed worthless after Hurricane Sandy? Chevy is donating about 300 to help train first responders at Guardian Centers in Georgia. Read more HERE A survey by Kelley Blue Book found that a third of...
Read full blog
|
|
|
|